Table of Contents
Advertisement
5. Troubleshooting
Calibration not successful
After an unsuccessful calibration, the message "Failed" appears on
the screen.
Possible solutions:
-
Use another test pattern for performing the calibration. The text in
§ 3.4, Calibrating the display , explains what test patterns to use.
-
Check the quality of the signal source and signal cables. Poor
video signals or cables can result in unsuccessful calibration.
Pixel Faults
Permanently dark or bright pixels can happen to TFT displays. 20 or
less permanently dead pixels do not make out a good case for
exchanging the unit.
Please contact our Customer Service Department if the number of
pixel faults exceeds the above-mentioned figure.
User manual MIVD 1218
29
Advertisement
Table of Contents
