Getting Information; General Information - Barco MIVD 1218 User Manual

Note:
The calibration of the video levels determines the calibrated position
or default setting of contrast and brightness. The black level
calibration determines the brightness, the white level calibration
determines the contrast.

3.5. Getting information

The Information menu allows you to get a lot of information about the
display and the connected signals.
To read the information:
1 Turn the control wheel to display the Information menu.
***MAIN MENU****
Information
2 Click the control wheel to enter the menu.
3 Turn the control wheel to select one of the categories: General or
Timing.
4 Click the control wheel to enter the selected information menu.
5 Turn the control wheel to scroll through the information.

General information

Input .........................Displays the currently selected input: analog
Current Mode ...........Displays the currently selected memory scan
ALC ..........................Displays if the Ambient Light Compensation
Power Led ................Displays if the power LED on the front is
Interlaced* ................Indicates if the display is processing the
Filter* ........................Displays which internal low-pass filter is
Serial #. ....................Indicates the display serial number
SW ...........................Displays the current internal software version
User manual MIVD 1218
composite video or DVI (digital)
mode
(ALC) is on or off. A check mark ( ) means on,
a cross ( ) means off
currently switched on or off. A check mark ( )
means on, a cross ( ) means off
selected input signal in interlaced or non-
interlaced mode. A check mark ( ) means
Interlaced, a cross ( ) means non-interlaced
currently selected
19