Barco Coronis Fusion 6MP Getting Started Manual page 25

Align the Barco display controller(s) for your B
7.
6MP Display System with the slot(s) and press it(them) in firmly
until the card(s) is(are) fully seated.
Note: The next step applies only to the MXRT 7300.
Connect the power cable to the 6-pin power connection on the
8.
graphics card. Make sure the cables are not interfering with
anything inside the computer (for example, a cooling fan).
Power connection for the MXRT 7300 controllers
Screw in or fasten the display controller securely. Replace and
9.
secure the computer cover.
Connect your Barco Coronis Fusion 6MP Displays to the Barco
10.
display controller(s) for your B
System using the cables supplied. Make sure all cables are
securely connected before turning on your system.
Display Controller Installation
ARCO
6-pin graphics controller
power cable
C F
ARCO ORONIS USION
C F
ORONIS USION
6MP Display
25