Barco Coronis Fusion 6MP Getting Started Manual page 55

Driver and Software Installation
"Always trust software from Barco" and press OK. The PnPUtil will
confirm the driver is loaded into the driver store.
At this point you can change to another directory and repeat this with
other drivers.
Since you have indicated that you always trust Barco software, you
will not see the trust prompt.
If you install using wildcards, you may see an error message that the
Autorun.inf was not an expected format. This is expected and is
harmless.
When you have added all of the drivers that you will need to the
driver store, you can image the drive, and use it for staging additional
systems. All of the systems with this driver store are set up for
intervention-free silent installation.
To do a silent installation it is only necessary to navigate to the Barco
root folder and execute the command "setup.exe -silent". This can be
done from the command shell, from the Run command, or from a
command shortcut. The setup program will automatically install the
drivers for any BarcoMed or MXRT boards that are present, the
BarcoMed Self Exam program, and QAWeb (if part of the installation
package).
55