Mode Config Settings - D-Link DWC-1000 User Manual

Mode Config Settings

Path: SETUP > VPN Settings > IPsec > IPsec Mode Config
If you enabled Mode Config settings on the IPSEC CONFIGURATION page, use the
following procedure to configure the Mode Config settings.
1. Click SETUP > VPN Settings > IPsec > IPsec Mode Config. The IPSEC MODE CONFIG
page appears.
2. Complete the fields in the page (see Table 6-2).
3. Click Save Settings.
4. To split DNS names, under Split DNS Names, click Add. In a split DNS infrastructure, you
create two zones for the same domain, one to be used by the internal network and the
other used by the external network. Split DNS directs internal hosts to an internal domain
name server for name resolution and external hosts are directed to an external domain
VPN Settings
109
DWC-1000 Wireless Controller User's Guide