D-Link DWC-1000 User Manual page 122

Table 6-7. Fields on the OPENVPN CONFIGURATION Page
Field
Enable Openvpn
Mode
Server IP
Vpn Network
Vpn Netmask
Port
Tunnel Protocol
Encryption Algorithm
Hash Algorithm
Tunnel Type
Enable Client to Client
Communication
Upload Status
File
VPN Settings
OpenVPN Server/Client Configuration
Enables or disables OpenVPN support. Choices are:
Checked = enable OpenVPN support.
•
Unchecked = disable OpenVPN support.
•
Select an OpenVPN daemon mode. Choices are:
Server = run OpenVPN daemon in server mode.
•
Client = run OpenVPN daemon in client mode.
•
Access Server Client = user must download the auto login profile from the OpenVPN Access
•
Server and upload the same to connect.
If Mode = Client, enter the OpenVPN server IP address to which the client connects (Applicable
in client mode).
Enter the IP address of the virtual network.
Enter the netmask of the virtual network.
Enter the port number on which OpenVPN server (or access server) runs.
Select the protocol used to communicate with the remote host. Choices are:
UDP
•
TCP
•
Select the cipher with which the packets are encrypted. Choices are:
BF-CBC
•
AES-128
•
AES-192
•
AES-256
•
Select the message digest algorithm used to authenticate packets. Choices are:
SHA1
•
SHA256
•
SHA512
•
If Mode = Server, select the type of tunnel through which traffic is redirected. Choices are:
Full Tunnel = redirect all the traffic through the tunnel.
•
Split Tunnel = redirect traffic to only specified resources (added from openVpnClient Routes)
•
through the tunnel.
Enables or disables OpenVPN clients to communicate with each other in split tunnel scenarios.
Choices are:
Checked = enable client-to-client communication.
•
Unchecked = disable client-to-client communication.
•
Updated Access Server-Client Configuration
Shows whether the user must download the auto-login profile and upload here to connect this
wireless controller to the OpenVPN access server.
Use this field and the Browse button to select the file containing the profile.
122
DWC-1000 Wireless Controller User's Guide
Description