Net Mode Configure; Net Ipv6_Tunnel Isatap Add; Net Ipv6_Tunnel Isatap Edit <Ltrow_Id - D-Link DWC-1000 Reference Manual

Wireless controller
Hide thumbs Also See for DWC-1000:
Table of Contents

Advertisement

Wireless Controller
2
save
Save Ip Alias server configuration changes.
Roll back Ip Alias server configuration
3
cancel
changes.
Save Ip Aias server configuration changes
4
exit
and exit current mode.
5
Interface
Select the Interface for the Ip Aliasing
6
Ip_Address
Ip Address for ip Aliasing.
7
Subnet_Mask
Subnet mask for ip Aliasing
12.20

net mode configure

S.No Com mand Nam e Description
1
save
Save IP Mode configuration changes.
Save IP Mode configuration changes and
2
exit
exit current mode.
3
cancel
Roll back IP Mode configuration changes.
4
ip_type
Select IPv4 only or IPv4/IPv6 mode.
12.21

net ipv6_tunnel isatap add

Com mand
S.No
Description
Nam e
1
save
Save isatap tunnel configuration changes.
Save isaptap tunnel configuration changes and exit current
2
exit
mode.
3
cancel
Roll back isatap tunnel configuration changes.
This is the 64-bit subnet prefix that is assigned to the logical
4
subnet_prefix
ISATAP subnet for this intranet.
This is the endpoint address for the tunnel that starts w ith this
5
end_point_type
router. The endpoint can be the LAN interface (assuming the
LAN is an IPv4 netw ork), or a specific LAN IPv4 address
6
ipv4_address
The local end point address if not the LAN IPv4 address
12.22
net ipv6_tunnel isatap edit <ltrow_id>
Com mand
S.No
Description
Nam e
1
<ltrow_id>
isatap Tunnel configuration mode.
2
save
Save isatap tunnel configuration changes.
Save isaptap tunnel configuration changes and exit current
3
exit
mode.
4
cancel
Roll back isatap tunnel configuration changes.
This is the 64-bit subnet prefix that is assigned to the logical
5
subnet_prefix
ISATAP subnet for this intranet.
This is the endpoint address for the tunnel that starts w ith this
6
end_point_type
router. The endpoint can be the LAN interface (assuming the
LAN is an IPv4 netw ork), or a specific LAN IPv4 address
Unsigned integer
OPTION interface type
IP address AAA.BBB.CCC.DDD w here each part is
in the range 0-255
IP address AAA.BBB.CCC.DDD w here each part is
in the range 0-255
Type and Description
select the ip address type
Type and Description
String
select the local end point address
type
IP address AAA.BBB.CCC.DDD
w here each part is in the range 0-
255
Type and Description
Unsigned integer
String
select the local end point address
type
80
CLI Reference Guide

Advertisement

Table of Contents
loading

Table of Contents