Restoring Factory Default Settings - D-Link DWC-1000 User Manual

Restoring Factory Default Settings

Path: TOOLS > System
If you reset a wireless controller to its factory default settings, it returns to the state when it
was new — all changes you made to the default configuration are lost. Examples of settings
that get restored include critical things you need to get online, such as login password,
SSID, IP addresses, and wireless security keys.
There are two ways to restore a wireless controller to its original factory default settings:
•
Use the reset button on the back of the wireless controller (see "Using the Reset Button"
on page 17).
• Use the web management interface instructions below.
1. Click TOOLS > System. The SYSTEM page appears.
2. Next to Factory Default settings, click the Default message.
3. At the confirmation message, click OK to restore factory default settings. (Or click Cancel
to retain your current settings.)
Note: After restoring the factory default configuration, the wireless controller's default LAN IP
address is 192.168.10.1, the default login user name is admin, and the default login
password is admin.
Maintenance
203
DWC-1000 Wireless Controller User's Guide