D-Link DWC-1000 User Manual page 153

Table 7-16. Fields on the MANAGED AP STATUS Page
Field
MAC Address
IP Address
Age
Status
Profile
Radio Interface
Table 7-17. Buttons on the MANAGED AP STATUS Page
Button
Delete
View AP Details
View Radio Details
View Neighbor Details
View Neighbor Clients
View VAP Details
Viewing Status and Statistics
Ethernet address of the access point being managed by the wireless controller.
Network IP address of the managed access point.
Time of the last communication between the wireless controller and the access point.
Current managed state of the access point. Possible values are:
Discovered = access point is discovered by the wireless controller, but is not yet
•
authenticated.
Authenticated = access point has been validated and authenticated (if authentication is
•
enabled), but it is not configured.
Managed = access point profile configuration has been applied to the access point and the
•
access point is operating in managed mode.
Failed = wireless controller lost contact with the access point. A failed entry will remain in the
•
Managed AP database unless you remove it. Note: a managed access point shows a failed
status temporarily during a reset.
Access point profile configuration currently applied to the managed access point. The profile is
assigned to the access point in the Valid AP database.
Wireless radio mode that each radio on the access point is using.
Clears existing access point.
Shows detailed status information collected from the access point.
Shows detailed status for a radio interface.
Shows the neighbor access points that the specified access point has discovered through
periodic RF scans on the selected radio interface.
Shows information about wireless clients associated with an AP or detected by the access point
radio.
Shows summary information about the virtual access points (VAPs) for the selected access point
and radio interface on the access points that the controller manages.
153
DWC-1000 Wireless Controller User's Guide
Description
Description