Dhcp Range - D-Link DWC-1000 User Manual

DHCP Range

Path: SETUP > VPN Settings > IPsec > DHCP Range
If clients will connect to the IPsec VPN using DHCP, use the IP RANGE FOR DHCP OVER
IPSEC to configure the DHCP settings.
1. Click SETUP > VPN Settings > IPsec > SHCP Range. The IP RANGE FOR DHCP
OVER IPSEC page appears.
2. Complete the fields in the page (see Table 6-3).
3. Click Save Settings.
Table 6-3. Fields on the IP RANGE FOR DHCP OVER IPSEC Page
Field
Starting IP Address
Ending IP Address
Subnet Mask
VPN Settings
Enter the starting IP address to be allocated in this range.
Enter the last IP address to be allocated in this range.
Enter the subnet mask for the IP address range.
112
DWC-1000 Wireless Controller User's Guide
Description