Connecting The Wireless Controller - D-Link DWC-1000 User Manual

Wireless controller
Hide thumbs Also See for DWC-1000:
Table of Contents

Advertisement

2. Use the screws provided with the equipment rack to mount the wireless controller in the
rack (see Figure 2-4).
Figure 2-4. Install the Wireless Controller in a Standard-Sized Equipment Rack

Connecting the Wireless Controller

To install the wireless controller, perform the following procedure (and see Figure 2-5 on
page 20).
1. Install the switch and access points according to the instructions in their documentation.
2. Connect one end of an Ethernet LAN cable to one of the ports labeled LAN (1-4) on the
front of the wireless controller. Connect the other end of the cable to an available RJ-45
port on the PoE switch in the LAN network segment.
3. Connect one of the wireless controller ports labeled LAN (1-4) to the network or directly to
a PC.
Your installation should resemble the one in Figure 2-5.
Unpacking and Installation
19
DWC-1000 Wireless Controller User's Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents