Four Gigabit Ethernet Lan Ports; Two Usb 2.0 Ports; Power Led - D-Link DWC-1000 User Manual



Four Gigabit Ethernet LAN Ports

Four Gigabit Ethernet ports labeled LAN 1 through LAN 4 let you connect Ethernet devices
such as computers, switches, and hubs. Each port has an Activity LED (left) and Link LED
(right) – see Table 2-2.


Two USB 2.0 Ports

Two Universal Serial Bus (USB) 2.0 ports are provided for connecting USB flash drives, hard
drives, computers, and printers. Each port has an LED.
LED
USB LED Green


Power LED

Facing the front of the wireless controller, the Power LED is located on the far left side. This
LED provides a visual indication of the wireless controller's power-on or power-off state.
LED Color
Power LED Green
Orange
Unpacking and Installation
Table 2-2. USB LEDs
Color
ON = link is good.
Blink = there is activity on the port.
OFF = device is powered off.
Table 2-3. Power LED
ON = power-on process complete.
OFF= wireless controller is powered OFF.
Blink = system is defective and firmware upgrades have failed.
ON = power-on process in progress.
OFF= wireless controller is in recovery mode following a crash.
DWC-1000 Wireless Controller User's Guide
Description
Description
16