Upgrading Software Using Tftp; Lost Passwords; Using The Boot Menu - 3Com 7700R - Switch Starter Kit Installation Manual

Installation guide
Hide thumbs Also See for 7700R - Switch Starter Kit:
Table of Contents

Advertisement

Upgrading Software
Using TFTP

Lost Passwords

Using the BOOT Menu

TFTP (Trivial File Transfer Protocol) is a simple file transfer protocol that is used
without complex interaction between clients and servers.
The client initiates a TFTP transmission. To download files, the client sends a read
request packet to the TFTP server, receives the packet from the server, and sends
the acknowledgement to the server. To upload files, the client sends a write
request packet to the TFTP server, sends the data packet to the server, and receives
the acknowledgement from the server.
The Switch 7700 provides the functions of the TFTP client.
A TFTP Server program is shipped on the CDROM with the Switch 7700.
Before you upgrade:
Verify that there is a connection between the TFTP server and the Switch 7700
(use the
command.)
ping
Verify that the TFTP server is set up according to the manufacturer's instructions
and that it is enabled and pointing to the correct directory.
To upgrade using TFTP:
1 Verify that you are logged in with super-user privileges.
2 From the Switch 7700 command line (in user view), TFTP the image file from the
TFTP server to the Switch 7700 using the following command:
tftp <TFTP Server IP Address> get
File-Optional>
3 Set the boot parameters to specify the file to boot the system from, using the
following command:
boot boot-loader filename
4 Reboot the system.
The following example illustrates this procedure:
<SW7700>tftp 10.10.110.1 get sw7700003.app
Transfer file in binary mode.
Now begin to download file from remote tftp server, please wait...
/
TFTP:
5690749 bytes received in 376 second(s).
File downloaded successfully.
<SW7700>boot boot-loader sw7700003.app
The specified file will be booted next time!
<SW7700>reboot
This command will reboot the system. Continue? [Y/N] y
If the BootROM password of the switch is lost, contact your local support center,
listed in Appendix B.
After you power on the Switch 7700, the BootROM program runs automatically.
The terminal displays the following information:
Starting......
Lost Passwords
<Source File/image>< Dest
55

Advertisement

Table of Contents
loading

This manual is also suitable for:

77003c168503c168523c16870

Table of Contents