3Com 7700R - Switch Starter Kit Installation Manual page 50

50 C 4: M
HAPTER AINTAINING
S
OFTWARE
2: Select application file to boot
3: Display all files in flash
4: Delete file from flash
5: Modify bootrom password
0: Reboot
Enter your choice(0-5):
Downloading an Application to Flash Memory
To download an application to flash memory:
1 Select option on the Boot Menu. The following menu displays:
1
1. Set TFTP protocol parameter
2. Set FTP protocol parameter
3. Set XMODEM protocol parameter
0. Return to boot menu
Enter your choice(0-3): 1
2 Select option then enter the appropriate information in the fields that display:
1
Load File name
Switch IP address
Server IP address
3 Type Y at the download prompt so the system downloads the file to flash:
Are you sure to download file to flash? Yes or No(Y/N) y
4 After the download is complete, select option
5 From the boot menu, select option
Selecting the Application File for the Boot
If the Switch 7700 primary image fails because of a CRC error or a file format
error, you can configure the system to find the backup image you select to boot
from.
To select the image file that you want the system to boot from:
1 Select option from the Boot Menu. The following text displays:
2
File Number
========================================================
1.
2(-).
3.
4.
5.
6.
7.
8(*).
9.
:sw7700003.app
:10.10.110.1
:10.10.110.50
then select the newly downloaded file.
2
File Size(bytes)
4
6256229
1012
151
228308
1975
631736
462848
228376
to return to the boot menu.
0
File Name
snmpboots
SW7700-V300RE-8016.app
taskswitch.log
private-data.txt
s.t
sw7700.cfg
Btm400.btm
SW7700-V300R-.app
S3com400.app