3Com 7700R - Switch Starter Kit Installation Manual page 51

10.
11.
12.
13.
The current application file is :SW7700-V300R-.app
The backup application file is :SW7700-V300RE-8016.app
Free Space : 7536640 bytes
2 Enter the file number of the primary image:
Please input the primary image file number :13
3 To confirm this choice, type Y at the prompt:
The file you selected is snec400.app, are you sure? Yes or No(Y/N) Y
On reboot,snec400.app will become the default primary image file!
4 Enter the file number of the backup image:
Please input the backup image file number : 8
5 To confirm this choice, type Y at the prompt:
The file you selected is SW7700-V300R-.app, are you sure? Yes or
No(Y/N) y
On reboot,SW7700-V300R-.app will become backup image file!
6 Type Y to run the primary image:
Do you want to run snec400.app now? Yes or No(Y/N)? Y
No Backup Image
following text displays:
Please input the backup boot file number :
Input Error!
Failed to select backup image file!
Type Y to run the primary boot file:
Do you want to run snec400.app now? Yes or No(Y/N)? Y
Backup Image Fails If the backup image fails and another backup image
configuration does not exist, the Switch 7700 will try to find any valid image on
the flash. This image is not the primary or backup image:
All Images Fail If all images fail, the Switch 7700 will return to the boot menu:
primary image : snec400.app
backup image : SW7700-V300R-.app
199696
2427
203460
228308
If you do not enter the number of a backup boot file, the
Upgrading Software
8241btm.app
vrpcfg.txt
lpcom400.app
snec400.app
51