3Com 7700R - Switch Starter Kit Installation Manual page 54

54 C 4: M
HAPTER AINTAINING
S
OFTWARE
7 Change the baud rate set at the configuration terminal, so that the baud rate is
consistent with the selected download baud rate of the software.
8 Disconnect the terminal and reconnect it.
9 Press Enter to start downloading. The terminal displays the following information:
Now please start transfer file with XMODEM protocol.
If you want to exit, Press <Ctrl+X>.
Waiting ... CCCCC
10 Select Transfer\Send File from the terminal window.
11 Click Browse in the Send file dialog box, shown in Figure 28 and select the
application you want to download.
Figure 28 Send File dialog box
12 Change the protocol name for the download to Xmodem.
13 Click Send. The dialog box shown in Figure 29 displays.
Figure 29 Xmodem File Send Dialog Box
14 After the download is complete, the system interface is shown, as follows:
Loading ...CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC done!
15 From the boot menu, select option then select the newly downloaded file.
2