Power Leds; Fan Led; Fabric 32 Submodules; 4-Port 1000Base-X-Gbic Submodule - 3Com 7700R - Switch Starter Kit Installation Manual

Power LEDs

Fan LED

Fabric 32 Submodules

4-Port 1000BASE-X-GBIC
Submodule
PWR1, PWR2, and PWR3 LEDs show the status of the power modules, as
described in Table 9.
Table 9 Power LEDs
LED
OK
FAIL
Fan LEDs show the status of the fan frame, as described in Table 10.
Table 10 Fan LEDs
LED
OK
FAIL
The Fabric 32 provides a slot for one submodule. The Fabric 32 supports the
following submodules:
4-Port 1000BASE-X-GBIC Submodule (3C16874)
■
4-Port 10/100/1000BASE-T Submodule (3C16873)
■
The 4-port 1000BASE-X-GBIC submodule provides four GE full-duplex Ethernet
GBIC ports.
Figure 3 illustrates the 4-port 1000BASE-X-GBIC submodule.
Figure 3 4-Port 1000BASE-X-GBIC Submodule
3C16874
1 2
Ethernet GBIC port
2 Ethernet GBIC port LED
Table 11 describes the 4-port 1000BASE-X-GBIC submodule LEDs.
4-Port 1000BASE-X-GBIC Submodule LEDs
Table 11
LED
LINK/ACT
Description
Green — The corresponding power module work is working
normally.
Off — The corresponding power module is not working or
has not been installed.
Green — The corresponding power module is not working.
Off — The corresponding power module works normally or
has not been installed.
Description
Green — The fan is working normally.
Off — The fan is not working or has not been installed.
Green — The fan is not working.
Off — The fan is working normally or has not been installed.
Description
Green — The link is operating normally.
Off — The link is not operating.
Green flashing — Data is being transmitted.
Fabric 32 Submodules 13