Database Upgrade; Call Router Dbupdate Tool - Altigen Advanced Call Router Manual

Database Upgrade

Database Upgrade
If a user has Basic Call Router installed to a machine without AltiServ, the
user will not be able to upgrade the Basic Call Router's database to the
Advanced Call Router's database.
If a user has Basic Call Router already installed to a machine running
AltiServ, then Basic Call Router's database will be upgraded automatically
if the Advanced Call Router is installed on the machine.
If the user wants to re-use routing rule information from Basic Call Router,
the user should perform a fresh install of Advanced Call Router to the
machine running AltiServ. From there, the user can use the CRDBUpdate
tool to update the Basic Call Router's database to the Advanced Call
Router's database.
After upgrading all the old rules from the Basic Call Router's database,
they can then be re-used by Advanced Call Router.

Call Router DBUpdate Tool

Important: Before using the CRDBUpdate tool to update Basic Call
Router's database to Advanced Call Router's 5.0 database,
please stop Advanced Call Router service and/or Basic Call
Router.
To run the Call Router DB update tool:
1. Open CRDBUpdate.exe.
2. Browse and/or select the 4.6 Basic Call Router's database at "Source
database," (default name - "callrouter.mdb.")
3. Browse and/or select the 5.0 Advanced Call Router's database as the
"Destination database," (default name -"callrouter.mdb.")
Figure 1. Call Router DBUpdate tool
2 Advanced Call Router Manual