Altigen Advanced Call Router Manual page 8

To Configure/Run Advanced Call Router:
To disconnect from this server, click the Disconnect button.
3. Select Operation>Logon Info.
4. In the Logon Info window, enter the Server Name and Default
Virtual Extension and Password, that Advanced Call Router will
connect to, then click OK.
(Optional) Check Auto Start Service to have Advanced Call Router
start routing calls automatically, after the system restarts or after
Advanced Call Router service has been stopped and restarted.
Note: AltiServ maintains a counter for each extension to track login
failures. Up to 8 login attempts are allowed, after which login
will be disabled from 1 to 24 hours (depending on the
Adminstrator's setting).
5. Click Start to run Advanced Call Router. When Advanced Call Router
is stopped, you can configure the server and login information.
6. Route Rules and Show Monitor can be configured while Advanced
Call Router is started.
4 Advanced Call Router Manual