Table of Contents
Advertisement
Getting Started
Trunk Status View (Trunk tab)
The third tab in the panel at the right is the Trunk tab.
The Trunk view displays Location and Status. The location identifies the
card ID and port (channel) number on the board. For example, in location
00:05, the card ID is 0 and the port number is 5.
The Status column states are described on page 9.
The dots at the left have the following meanings:
•
A black circle means not ready.
•
A green circle means idle.
•
A red circle means the line is in use, off hook for some reason such as
on hold, or in an error condition.
If all trunks are busy, the Trunk tab title will flash to notify the operator
that no more trunks are available.
Speed Dial View (SPEED tab)
The last tab in the panel at the right is the Speed tab.
The Speed Dial view displays a list you can set up for speed dialing and
speed transfers. It is similar to, but more functional than, the system or
station speed dialing lists in AltiServ.
You can set up your Speed Dial list as described on page 22.
The columns information is the same as that in the BLF and ALL views
above, but there is an additional dot indicator: a solid blue dot represents an
outside line.
As with the BLF or All view, you can sort by any of the columns except the
Status column by clicking the column heading. Clicking the heading
repeatedly reverses the sort order from descending to ascending and vice
versa.
8 AltiConsole User Guide
Advertisement
Table of Contents
