Vfo Mode; Iswitching The Band; I1Mhz Up/Down; Ientry Completion Digit For Different Tuning Steps - Alinco DJ-C7T Instruction Manual

Vhf/uhf fm transceiver
Hide thumbs Also See for DJ-C7T:
Table of Contents

Advertisement

4.5 VFO Mode

This is the mode which is set as the factory-shipped
configuration.
Radio frequencies and various settings can be changed by
rotating the dial in this mode.

ISwitching the Band

Every time you press the
can be switched in order.
Default VHF
DJ-C7T: 145.000 (142.000-173.995MHz)
DJ-C7E: 145.000 (144.000-145.995MHz)
L-UHF
DJ-C7T: 380.000 (380.000-419.995MHz)
H-UHF
DJ-C7T: 445.000 (420.000-511.995MHz)
DJ-C7E: 433.000 (430.000-439.995MHz)
FM Radio
DJ-C7T: 88.100 (88.100-107.995MHz)
DJ-C7E: 87.500 (87.500-107.995MHz)
Air Band
DJ-C7T: 118.000 (108.000-141.995MHz)
I1 MHz UP/DOWN
When you rotate the dial with holding the
can increase or decrease a frequency by a 1MHz-step in
accordance with the direction of dial rotation.
This function is a quick way to increase or decrease the
frequency by a large amount.
After pressing the
key, releasing it without any dial
operations can switch among bands.
key, the 7 bands listed below
FM
FM
FM
WFM
AM/FM
key down, you

IEntry Completion Digit for Different Tuning Steps

The tuning step can be changed. You may choose one of the
selections as follows:
Auto, 5, 6.25, 8.33, 10, 12.5, 15, 20, 25, 30, 50, 100, 125, 200 kHz.
1. Press the
key to select the band to change its
tuning step.
2. Press the
key, and press the MONI key when you
see the
icon appears on the LCD.
3. Rotate the dial to choose a tuning step as you desire.
4. Press the PTT key to complete the setting and to
return to the operating mode.
The default tuning step is set to "Auto".
Choosing any tuning step but "Auto" in any of the bands
releases the default setting to "Auto" in all provided band
selections, and the last selected tuning step for a specified
band is programmed.
Returning the setting to "Auto" in a specified band, all tuning
steps for all provided bands will be returned to "Auto".
"Auto" uses tuning steps and modes which are programmed
into the DJ-C7 at the factory.
4
15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dj-c7e

Table of Contents