BASIC OPERATIONS
Switch between Channel Mode and VFO Mode
Under standby state, press
mode(VFO).
Channel Adjusting
1.
When transceiver in Channel mode or FM radio channel mode, press key
Press
to enter the upward channel, Press
channel between two channels, radio will skip blank channels.
2.
Input channel number by keypad
When transceiver is in Channel mode or FM radio channel mode, user can input number(000-199) to
switch into desired channel. If input channel number is not belong to unprogrammed channel, radio will
emit wrong prompt voice to return current channel. 001 means channel 1, 030 is channel 30, 125 is
channel 125.
Frequency Adjusting
When transceiver in VFO mode or FM radio frequency mode, rotate
frequency by keypad.
1.Press
to increase frequency, Press
stepping value.
NOTE: Channel step:2.5K, 5K, 6.25K, 10K, 12.5K, 20K, 25K, 30K and 50KHz in total 9 for optional. FM
radio step frequency is 50K.
key to set main band as Channel mode or frequency
to decrease frequency. Every rotate can add or reduce one
to enter the downward channel. If there is blank
/
to adjust frequency or input
/
to adjust channel.
12