Switch Between Channel Mode And Vfo Mode; Channel Adjusting; Frequency Adjusting - Alinco DJ-CRX2 Instruction Manual

BASIC OPERATIONS

Switch between Channel mode and VFO mode

Under standby state, press
frequency mode(VFO).

Channel Adjusting

1.
When transceiver in Channel mode or FM radio channel mode, rotate
Press to enter the downward channel, Press
B
channel between two channels, radio will skip blank channel into next channel.
2.
Input channel number by keypad
When transceiver in Channel mode or FM radio channel mode, user can input number(000-199) to
switch into desired channel. If input channel number is not belong to unprogrammed channel, radio
will emit wrong prompt voice to return current channel. 001 means channel 1,030 is channel 30, 125
is channel 125.

Frequency Adjusting

When transceiver in VFO mode or FM radio frequency mode, rotate
input frequency by keypad.
1.Press to increase frequency, Press
B
stepping value.
NOTE: Channel step:12.5K. FM radio step frequency is 50K.
key to set main band as Channel mode or
to enter the upward channel. If there is blank
C
to decrease frequency. Every rotate can add or reduce one
C
/ to adjust channel.
B C
/ to adjust frequency or
B
C
12