Operation Modes; Operating The Transceiver In The Vfo Mode - Alinco DJ-G7 Instruction Manual

6.0peration Mode
6.0peration Mode
The DJ-G7 has 3 operation modes: the VFO, Preset and Memory mode.
VFOmode VFO is the abbreviation of Variable Frequency Oscillator. This
mode allows choosing the frequency by rotating the dial.
Preset mode The audio frequencies of AM and FM radios and TV channels
are preset in the sub band. Using the frequency limitation
function, the preset mode of repeater frequency bands can be
added to the main band (T-version only)(P.89).
Memory mode The Memory mode recalls frequencies registered previously.
Please read "Memory Mode (P.39)" to practice memory
registration.
o
C AUTION
'Only analog TV audio may be received. TV audio from digital
transmissions cannot be received.
34
'Switching the operation mode
Every time the
I!J
key is pressed, the modes switch in the order shown in the
illustration.
VVFOmode
~p-re-s-e-t'::::m::"'o-d-e--') ~
~c
'The Preset mode can be deleted from the choices of operation modes.
'The repeater operation frequency alone can be added to the main
MEMO
band as the Preset mode. Please read "Receiver Range Function
(P.89)" and "Preset Mode Settings (P.89)" for details.
( 6-1 Operating the Transceiver in the VFO Mode)
This is the mode that is active when the transceiver is turned on after being
shipped from the factory. Frequencies can be selected by rotating the dials.