BASIC OPERATIONS
Switch between Channel mode and VFO mode
Under standby state, press
frequency mode(VFO).
Channel Adjusting
11
When transceiver in Channel mode or FM radio channel mode, rotate
to enter the downward channel, Press
Press
B
channel between two channels, radio will skip blank channel into next channel.
21
Input channel number by keypad
When transceiver in Channel mode or FM radio channel mode, user can input number(000-199) to
switch into desired channel. If input channel number is not belong to unprogrammed channel, radio
will emit wrong prompt voice to return current channel. 001 means channel 1,030 is channel 30, 125
is channel 125.
Frequency Adjusting
When transceiver in VFO mode or FM radio frequency mode, rotate
input frequency by keypad.
1.Press
to increase frequency, Press
B
stepping value.
NOTE: Channel step:2.5K, 5K, 6.25K, 10K, 12.5K, 20K, 25K, 30K and 50KHz in total 9 for optional. FM
radio step frequency is 50K.
key to set main band as Channel mode or
to enter the upward channel. If there is blank
C
to decrease frequency. Every rotate can add or reduce one
C
/
to adjust channel.
B
C
/
to adjust frequency or
B
C
12