Iclearing A Memory Channel; Icontents Of Memory Channel - Alinco DJ-C7T Instruction Manual

IClearing a Memory Channel

1. Set the Memory Write Protect function to OFF, if necessary.
For more information on this function, please refer to "Memory
Write Protect function" on P.26.
2. Press the key to switch to the Memory mode.
3. Rotate the dial to select the memory channel number
you wish to delete.
4. Press the key, and press the
icon appears on the LCD.
A beep sounds telling that the frequency is deleted
successfully, and "------" is displayed on the LCD.
5. With "------" displayed on the LCD, rotate the dial to
return to the Memory mode.
Press the key to return to the VFO mode.
When there are no programmed memory channels, press the
key to return to the VFO mode.
Tip
Right after deleting the memory channel with "------"
displayed on the LCD, you can restore what you erased.
To restore the channel, press the
key again while the
Note that you won't be able to restore it once you change
the operating mode.
key while the
key and press the
icon appears on the LCD.

IContents of Memory Channel

The following settings can be stored in each memory channel:
• Frequency
• Shift frequency
• Shift direction (+/-) and Split setting
• Tone encoder frequency
• Tone decoder frequency
• Tone encoder/decoder setting
• Mode (AM/FM)
4
17