Adjusting The Squelch; Operating Modes; Iswitching Between Modes - Alinco DJ-C7T Instruction Manual

4.3 Adjusting the Squelch

The squelch is a function for eliminating noise when no signals
are present.
"To open the squelch" means that the DJ-C7 monitors any
signals stronger than the squelch level you set.
• There are 10 squelch levels. (0-9)
• Default is set to 3.
1. Press the dial twice.
4
" " will be displayed on the LCD indicating the present
squelch level.
2. Adjust the squelch level by rotating the dial.
When you set it to a higher level, weak signals would be
interrupted while monitoring or would not be monitored at all.
Generally, you should set the squelch to the lowest level where
noise would be eliminated.
Depending on the monitored frequencies and the conditions of
the circumstances around you, the squelch level may need to
be adjusted.
3. Press the dial again or the PTT key to complete the
setting and to return to the operating mode.
It also returns to the operating mode when no dial operations
are made for 5 seconds.
14

4.4 Operating Modes

The DJ-C7 has two operating modes; VFO mode and Memory
(MR) mode.

ISwitching Between Modes

Every time you press the
switched between these two.
When you switch to the Memory mode, the memory number will
be displayed on the LCD.
VFO mode
Tip
When there are no programmed memory channels, it can't
be switched to the Memory mode.
key, the operating mode can be
MR mode