8.2 Resetting
When you reset the transceiver, all settings are returned to the
initial (default) factory setting. You can reset programmed
channel memory when the write protect is off.
1. Press and hold the
to turn the power on.
2. Release the keys when all icons are displayed.
The transceiver returns to the initial VFO mode.
GFactory Setting
• VFO Frequency VHF
• Memory Channel
• Audio Volume
8
• Squelch Level
• Battery Save
• Scan Resume Condition
• Beep
• Tuning Step
• Shift
• Shift Range
• Tone Squelch
• Tone Frequency
• APO, BELL
30
key and press the
:145.000MHz
L-UHF
:380.000MHz (T version)
UHF
:445.000MHz (T version)
UHF
:433.000MHz (E version)
FM Radio :88.100MHz (T version)
FM Radio :87.500MHz (E version)
Air
:118.000MHz (T version)
0 - 199ch blank
10
3
ON
Busy Scan
ON
Auto
OFF
VHF
:0.6MHz
UHF
:5.0MHz
OFF
88.5Hz
OFF
8.3 Options
EME-24
EMS-60
EDH-32
ESC-38
key
EME-18
EBP-58N
EDC-126/128
Earphone microphone
Speaker microphone
Cigarette lighter cable
Soft case
Earphone
Li-ion battery pack (DC3.7V 600mAh)
AC battery charger