Detailed Pin Descriptions; A20M# Pin; Amd Pin; Amd Athlon System Bus Pins - AMD AX1800DMT3C - Athlon XP 1.53 GHz Processor Datasheet

Amd athlon xp processor model 6 data sheet
Table of Contents

Advertisement

AMD Athlon™ XP Processor Model 6 Data Sheet
10.3

Detailed Pin Descriptions

A20M# Pin

AMD Pin

AMD Athlon™
System Bus Pins

Analog Pin

APIC Pins, PICCLK,
PICD[1:0]#

CLKFWDRST Pin

CLKIN, RSTCLK
(SYSCLK) Pins
68
Preliminary Information
The information in this section pertains to Table 20 on page 60.
A20M# is an input from the system used to simulate address
wrap-around in the 20-bit 8086.
AMD Socket A processors do not implement a pin at location
AH6. All Socket A designs must have a top plate or cover that
blocks this pin location. When the cover plate blocks this
location, a non-AMD part (e.g., PGA370) does not fit into the
socket. However, socket manufacturers are allowed to have a
contact loaded in the AH6 position. Therefore, motherboard
socket design should account for the possibility that a contact
could be loaded in this position.
S e e t h e A M D A t h l o n ™ a n d A M D D u r o n ™ S y s t e m B u s
Specification, order# 21902 for information about the system
bus pins — PROCRDY, PWROK, RESET#, SADDIN[14:2]#,
S A D D I N C L K # , S A D D O U T [ 1 4 : 2 ] # , S A D D O U T C L K # ,
SDATA[63:0]#, SDATAINCLK[3:0]#, SDATAINVALID#,
SDATAOUTCLK[3:0]#, SDATAOUTVALID#, SFILLVALID#.
Treat this pin as a NC.
The Advanced Programmable Interrupt Controller (APIC) is a
feature that provides a flexible and expandable means of
delivering interrupts in a system using an AMD processor. The
pins, PICD[1:0], are the bi-directional message-passing signals
used for the APIC and are driven to the Southbridge or a
dedicated I/O APIC. The pin, PICCLK, must be driven with a
valid clock input.
For more information, see Table 16, "APIC Pin AC and DC
Characteristics," on page 41.
CLKFWDRST resets clock-forward circuitry for both the system
and processor.
Connect CLKIN with RSTCLK and name it SYSCLK. Connect
CLKIN# with RSTCLK# and name it SYSCLK#. Length match
the clocks from the clock generator to the Northbridge and
processor.
Pin Descriptions
24309E—March 2002
Chapter 10

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AX1800DMT3C - Athlon XP 1.53 GHz Processor and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

This manual is also suitable for:

Ax2000dmt3c - athlon xp 1.67 ghz

Table of Contents