Setting Cut Sheet Media To Bypass Feeder - Konica Minolta KIP 9900 User Manual

2. 4 Setting Cut Sheet Media to Bypass
Feeder
Cut sheet media can be fed into KIP 9900 from the Bypass Feeder. Orientation, length and
availability of multi-feeding are specified for each media width separately as follows.
Metric size
Width of cut Available orientation
sheet media
297mm Landscape only
420mm Landscape only
594mm Landscape only
841mm Portrait & Landscape
Inch size
Width of cut Available orientation
sheet media
11" Landscape only
12" Landscape only
17" Landscape only
18" Landscape only
22" Landscape only
24" Landscape only
30" Portrait & Landscape
34" Portrait & Landscape
36" Portrait & Landscape
NOTE
(1) Availability of orientation for each media size is illustrated on the Bypass Feeder.
Please follow the illustration when setting the cut sheet media.
(2) Multi-feeding is available if the cut sheet media is narrower than A2 (594mm) or 24".
Refer to [2.4.1 Multi-feeding of cut sheet media] on the next page.
Available length
210mm only
297mm only
420mm only
Not specified (But it must be longer than 440mm.)
Available length
8.5" only
9" only
11" only
12" only
17" only
18" only
Not specified (But it must be longer than 440mm.)
Not specified (But it must be longer than 440mm.)
Not specified (But it must be longer than 440mm.)
2-16
Availability of multi-
feeding
Available
Available
Available
Not available
Availability of multi-
feeding
Available
Available
Available
Available
Available
Available
Not available
Not available
Not available
Landscape Portrait
Orientation is specified
Chapter 2 Basic Operations