Table of Contents
Advertisement
6. Rotate the green Fuser Handle counter-clockwise to eject the mis-feed media from the Fuser
Unit.
7. Remove the mis-feed media when ejected.
CAUTION
(1) There are many hot parts inside of the Exit Cover. (Fuser Roller and Pressure Roller are
especially hot but other parts are as well.)
Do not touch such parts positively when removing the mis-fed media!
The mis-fed media is very hot also. Take great care not to be burnt!
(2) There are Paper Stripper Fingers inside of the Exit Cover, which have very sharp tip.
Do not touch them when removing the mis-fed media, or you may be harmed!
Pressure Roller
Paper Stripper Fingers
3-21
Chapter 3
Fuser Handle
Mis-feed media
Fuser Roller
Error Correction & Maintenance
Advertisement
Chapters
Table of Contents
