Table of Contents
Advertisement
2. 8.14 User Mode A1 (Auto Initial Cut: Media)
Under a certain usage environment, the first print of a job sometimes would have a wrinkle or an
image void if the prints are made with a roll media left in the deck for a long period.
"Auto Initial Cut" makes an automatic initial cut in a specified amount at the leading edge before
processing a job to obtain image quality and feed balance in such conditions.
"Auto Initial Cut" can be specified which media type to be activated individually.
Setting value
0
1
2
3
4
5
6
7
2. 8.15 User Mode A2 (Auto Initial Cut: Length)
Under a certain usage environment, the first print of a job sometimes would have a wrinkle or an
image void if the prints are made with a roll media left in the deck for a long period.
"Auto Initial Cut" makes an automatic initial cut in a specified amount at the leading edge before
processing a job.
This setting can select the length to be cut of 300 / 450 / 600mm at the leading edge.
Setting value
600
450
300
A shorter choice can reduce waste of media but is not enough to remove one full revolution of the
roll.
Plain
Tracing
Bond
Vellum
---
---
X
---
---
X
X
X
---
---
X
---
---
X
X
X
Description
The amount to be cut is 600mm long.
The amount to be cut is 450mm long.
The amount to be cut is 300mm long.
Film
---
---
---
---
X
X
X
X
2-72
Chapter 2
Basic Operations
Advertisement
Chapters
Table of Contents
