Receiving Mode - Kyocera ECOSYS FS-1135MFP Operation Manual

Receiving Mode

The following five receiving modes are available.
• FAX Automatic Reception [Auto (Normal)]
• FAX/TEL Auto Switch Reception [Auto (FAX/TEL)] (Refer to page 6-4.)
• FAX/Answering Machine Auto Switch Reception [Auto (TAD)] (Refer to page 6-4.)
• DRD Reception [Auto (DRD)] (Refer to page 6-14.)
• Manual Reception [Manual] (Refer to page 4-9.)
Select the mode appropriate for the way the machine is used.
NOTE:
DRD reception mode is available for some countries.
Pattern 1
Pattern 2
Pattern 3
Pattern 4
1
2
3
4
5
6
7
8
9
10
Pattern
11
6-10
Press the System Menu/Counter key.
Press the  or  key to select [FAX].
Press the OK key.
Press the  or  key to select [Reception].
Press the OK key.
Press the  or  key to select [RX Settings].
Press the OK key.
Press the  or  key to select the desired receiving
mode.
Press the OK key. Proceed to the next step if you
selected [Auto(DRD)] in step 11.
Press the  or  key to select the DRD Pattern.
Description
Normal Ring
Double Ring
Short-Short-Long
Short-Long-Short
Press the OK key.
Setup and Registration