Error Code List - Kyocera ECOSYS FS-1135MFP Operation Manual

Error Code List

When a transmission error occurs, one of the following error codes is recorded in the TX/RX Result Report and
Activity Report.
NOTE:
If an error occurs during V34 communication, the U in the error codes is replaced by an E.
Error Code
Busy
CANCELED
U00300
U00420 - U00462
U00600 - U00690
U00700
U00800 - U00810
U00900 - U00910
U01000 - U01092
U01100 - U01199
U01400
U01500
U01600
U01700 - U01720
Possible Cause/Action
Failed to establish connection with the recipient
despite auto redialing the preset number of times.
Send again.
Transmission was canceled due to an action to
cancel transmission.
Reception was canceled due to an action to
cancel reception.
Paper depletion occurred at the recipient
machine. Check with the recipient.
Reception was canceled because of mismatching
of communication features with the sender
machine although the line connection was
established.
Communication was stopped due to the machine
failure. Send or receive again.
Communication was stopped due to failure on the
part of the sender or recipient machine.
Page(s) not sent correctly. Send again.
Page(s) not received correctly. Ask the sender to
resend.
Communication error occurred during
transmission. Send again.
Communication error occurred during reception.
Ask the sender to resend.
Failed to establish communication with the sender
or recipient machine because dialing registered
for a push line system was used in a pulse line
system.
Communication error occurred during high-speed
transmission. Send again.
Communication error occurred during reception of
high-speed transmission. Ask the sender to
reduce the transmission speed and send again.
Communication error occurred during high-speed
transmission. Send again.
Appendix-11