Chain Dial - Kyocera ECOSYS FS-1135MFP Operation Manual

Chain Dial

Chain dial is a function that allows you to dial by linking fax numbers of the receiving systems with a chain number
created with a number common to several destinations. By setting a toll free number and an area code to a chain
number, you do not need to enter such numbers for each transmission.
NOTE:
You can use the chain number at the head of the fax number of the receiving system.
As an example, when using '212' as the chain number
Fax No. Entry:
212*
[ Chain
1
2
3
4
A b
] [ Detail ]
5
NOTE:
address book selection screen will not appear.
6
4-7
Press the FAX key.
Place the originals.
Enter '212' using the numeric keys.
Press [Chain] (the Left Select key).
Enter the fax number to connect to the chain number.
Use the numeric keys to enter a fax number
1 '212' is already entered, and then enter the fax
number.
2 After entering all the destinations, press the OK key.
Select fax number from the Address Book
1 Press the Address Book key.
2 Press the  or  key to select [Address Book] or
[Ext Address Book].
If an expansion address book is not registered, the
3 Press the OK key.
4 Press the  or  key to select the desired
destination.
5 Press the OK key. '212' is automatically added to
the destination.
Select fax number from One-touch key
Select the destination from One-touch keys. The chain
number '212' is automatically added to the destinations.
Press the Start key. Transmission begins.
FAX Operation (Advanced)
4