Broadcast Transmission - Kyocera ECOSYS FS-1135MFP Operation Manual

Broadcast Transmission

This function allows you to send the same originals to several destinations in one operation. The machine stores
(memorizes) originals to send in memory temporarily, and automatically repeats dialing and transmission to the set
destination afterwards.
NOTE:
You can send originals to up to 100 destinations in one operation.
You can use this function together with sub address communication and delayed transmission.
When direct transmission has been selected, it changes to memory transmission at the time of transmission.
1
Press the FAX key.
2
Place the originals.
3
Select the destination.
Enter the fax number
1 Use the numeric keys to enter the fax number.
2 Press the OK key. You can enter the next fax
number.
Select the destination from the Address Book
1 Press the Address Book key.
Press the  or  key to select the desired
2
destination.
3 Press the OK key. You can select the destination by
pressing the Address Book key.
Select the destination from the One-touch keys
Press all the One-touch keys to which necessary
destinations are registered.
NOTE:
For details of the Address Book, refer to Using the
Address Book on page 3-14. For details of One-touch keys,
refer to Using One-touch Keys on page 3-23.
You can select destinations using a combination of direct
entry, the Address Book and One-touch keys.
4
After selecting all the destinations, press the Start key.
Transmission begins.
NOTE:
In addition to fax, you can include e-mail
transmission and/or folder (SMB/FTP) transmission in a
single transmission job (Multi Sending). For details, refer to
Sending in the Operation Guide for the machine.
4-4
FAX Operation (Advanced)