Diagnostic Menu
Read Codes
✓
The Read Codes function allows the Scan Tool to read the DTCs from
the vehicle's control modules. DTCs are used to help determine the
cause of a problem or problems with a vehicle. These codes cause the
control module to illuminate the malfunction indicator lamp (MIL)
when emission-related or driveability fault occurs. MIL is also known
as service engine soon or check engine lamp.
✓
Read Codes can be done with the key on engine off (KOEO) or with
the key on engine running (KOER).
From Diagnostic Menu:
1. Select Read Codes.
•Use
UP or
arrow key until Read Codes is
highlighted.
•Press
2. If more than one module is
supported, a menu is
displayed.
•Use
UP or
arrow key until desired choice
is highlighted.
•Press
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 4 – 7
DOWN
ENTER.
DOWN
ENTER.
Diagnostic Menu
=====================
I/M Monitors
Read Codes
Read Codes
Erase Codes
MIL Status
State OBD Check
View Data
Select Module
=====================
Global OBD II
Global OBD II
ABS
All of the Above
4