Using The Scan Tool
1. Select Print Data.
•Use
UP or
arrow key until Print Data is
highlighted.
•Press
✓
On the Print Data menu, Print All prints all data collected by the Scan
Tool.
✓
When printing a Recording, Start Frame and End Frame need to be
defined.
2.Select Data To Be Printed.
•Use
UP or
arrow key.
•Press
✓
The Print Data menu shows a
check mark next to the items that
have data.
✓
If there isn't a checkmark next to the item, then this item can't be
selected until the appropriate function is run from the Diagnostic
Menu.
3.Return to Select Print Data screen.
•Press
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 3 – 21
DOWN
.
ENTER
DOWN
.
ENTER
.
BACK
Main Menu
=====================
Vehicle Diagnostics
Review Data
Print Data
Print Data
System Setup
Print Data
=====================
Print All
Print All
I/M Monitors
DTCs (Codes)
State OBD Check
Recording
View Fre eze Data
3