Recording - Actron CP9580 Instruction Manual

Using The Scan Tool

Recording

The Recording function is used to play back a recording.
✓
This function is very similar to View Data. The only difference is that
View Data is real time viewing of PIDs, while Recording is a viewing
of previously recorded PIDs.
From the Review Data menu:
1.Select Recording.
•Use UP or
arrow key until Recording is
highlighted.
2. Play Back Recording.
✓
The Recording has frame
number and timestamp (in
seconds).
❒
Negative frames and
timestamps indicate data
recorded before trigger event.
❒
Positive frames and
timestamps indicate data
recorded after trigger event.
❒
Use UP or
of each frame.
❒
Use LEFT or
through frames.
❒
See Appendix A for PID Definitions.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 3 – 19
DOWN
=====================
I/M Monitors I/M Monitors
DTCs (Codes)
State OBD Check
Recording
View Fre eze Data
02 Monitor Tests
MIL STATUS
ABS TPS(%)
ENGINE (RPM)
A/F RATIO
CALC LOAD
FRAME:0 TM
DOWN arrow keys to view recorded PID data
RIGHT arrow keys to scroll back and forth
Review Data
ON
100
688
14:1
83.1
0.0
3