Print Data - Actron CP9580 Instruction Manual

Using The Scan Tool
❒
If graphing is available for
selected PID, the "
located on the side of the
screen.
– Press
graph.
– Press
Recording
to
✓
The triangle below the graph indicates the position of the frame in
the graph.
❒
Use
through graph.
3
✓
Different vehicles communicate at different speeds and support a
different number of PIDs. Therefore, the maximum number of frames
that can be recorded varies.
3.Return to Review Data menu.
•Press

Print Data

The Print Data function allows the printing of diagnostic information
stored in the Scan Tool.
✓
The Scan Tool's internal battery power can be used to print data.
✓
Use the Print Header function to turn On/Off printing vehicle
information prior to printing data.
✓
Make sure you have previously downloaded and installed the
Scanning Suite PC software from www.actron.com. Refer to
"Download Scanning Suite" on page 2-2.
✓
Launch Scanning Suite and then start printing application.
✓
Follow all instructions on PC.
3 – 20 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
" icon is
to view
ENTER
ENTER again to return
.
LEFT or RIGHT arrow keys to scroll back and forth
.
BACK
ABS TPS (%) 59%
100+
0 +
FRAME:0 TM 0.0