Using The Scan Tool
Vehicle-Specific Features
Review Data
✓
The Review Data function allows the user to view the information
from the previous vehicle tested.
✓
Scan Tool does not require power from the vehicle to use the
Review Data function.
1. Select Review Data.
•Use
3
arrow key until Review Data is
highlighted.
•Press
2.Follow prompts and instructions provided by Scan Tool and
then select item whose data you wish to review.
✓
The Review Data menu shows a
checkmark next to the item(s) that
has data.
✓
If there isn't a checkmark next to
the item, then this item can't be
selected until the appropriate
function is run from the
Diagnostic Menu.
✓
Only 1 function, Recording, needs detailed instructions.
3 – 18 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
UP or
DOWN
.
ENTER
Main Menu
=====================
Vehicle Diagnostics
Review Data
Review Data
Print Data
System Setup
Review Data
=====================
I/M Monitors
I/M Monitors
DTCs (Codes)
State OBD Check
Recording
View Fre eze Data
02 Monitor Tests