Using The Scan Tool
Quick Test
✓
Quick Test is a feature of the tool that occurs the first time the tool
establishes communication with the vehicle after vehicle selection.
Quick Test will display the results of I/M Monitors and Read Codes.
Quick Test is enabled by default.
From System Setup menu:
1.Select Quick Test.
•Use
arrow key until Quick Test is
highlighted.
•Press
3
2.Select desired Quick Test
choice.
•Use
arrow key until desired choice
is highlighted.
3.Save Quick Test setting.
• Press
3 – 10 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
UP or
DOWN
.
ENTER
UP or
DOWN
.
ENTER
System Setup
=====================
English/Metric
Adjust Contrast
Auto-Power Off
Quick Test
Quick Test
Print Header
Language Setup
Quick Test
=====================
Disabled
Disabled
Enabled