System Setup - Actron CP9580 Instruction Manual

Using The Scan Tool
Vehicle Power
When the Scan Tool is connected to the
vehicle's DLC, the tool is powered by the
vehicle and will automatically turn on once
connected.
USB Power
When the tool is connected to a Personal Computer (PC) via the USB
cable, the tool will automatically power up.
✓
Refer to Scan Tool Does Not Power Up in section 5
Troubleshooting on page 5-1 if there are problems.
3

System Setup

✓
System Setup allows:
❒
Measurement units to be changed.
❒
Display contrast to be changed.
❒
Auto-Power off time to be changed.
❒
Print Header to be turned ON or OFF.
❒
Scan Tool information to be viewed.
❒
Display to be checked.
❒
Operation of the keypad to be checked.
❒
Memory of the tool to be checked.
❒
Scan Tool to be upgraded.
❒
Language to be changed.
❒
Quick Test to be turned ON or OFF.
From Main Menu:
3 – 6 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •