Using The Scan Tool
Code Lookup
Code Lookup is used to look up definitions of DTCs stored in the Scan
Tool.
✓
The Scan Tool does not require power from the vehicle to perform this
function.
From Diagnostic Menu:
1. Select Code Lookup.
•Use
arrow key until Code Lookup
3
is highlighted.
•Press
2.Enter code.
•All characters must be entered
•Only one character can be
changed at a time.
•Use
arrow keys to scroll to desired
digit.
•Use
arrow keys to change selected
digit.
• Press
✓
Some vehicles may have an additional screen asking in which system
to look for a code.
✓
If definition could not be found, the Scan Tool displays No DTC
Definition Found. See Service Manual.
3 – 22 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
UP or
DOWN
.
ENTER
LEFT or
RIGHT
UP or
DOWN
.
ENTER
Diagnostic Menu
=====================
Vehicle Information
Modules Present
Review Data
Print Data
Code Lookup
Code Lookup
System Setup
Code Lookup
===================
P
P0000
Enter Desired Code
Using
Keys
Press ENTER
When
Done