Diagnostic Menu
1. Select Record Data.
•Use
arrow key until Record Data is
highlighted.
•Press
✓
Follow all instructions on display.
✓
The ScanTool can maintain only one recording. Make sure to
thoroughly review old recording before erasing.
✓
If a recording currently exists in
memory, a message prompting to
4 4
erase data is displayed.
✓
Scan Tool validates list of global PIDs from vehicle.
2. Refer to View Data to setup Custom List or View Entire List.
3. Press
recording.
4 – 22 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
UP or
DOWN
ENTER.
ENTER to start
Diagnostic Menu
=====================
Read Codes
Erase Codes
MIL Status
State OBD Check
View Data
Record Data
Record Data
Record Data
=====================
Previous recording
in memory. Do you
want to erase it and
make a new one?
NO
YES
Record Data
=====================
Ready to record.
Press Enter
to start recording.
Press BACK
To Exit.