Actron CP9580 Instruction Manual page 79

Diagnostic Menu
1. Select Drive Cycle Monitor.
•Use UP or
key to highlight Drive Cycle
Monitors.
•Press
✓
Two types of Drive Cycle Monitors are:
❒
SINCE DTCs CLEARED shows status of the monitors since the
Diagnostic Trouble Codes were last erased.
❒
THIS DRIVE CYCLE shows status of monitors since start of
current drive cycle. Refer to the vehicle service manual for more
detailed information on emission-related monitors and their status.
✓
Some vehicles DO NOT support
Drive Cycle Monitors. If vehicle
supports both types of Drive Cycle
Monitors the Menu will display.
2.View Summary of Monitor Status.
•Use UP or
3.Depending on the Drive Cycle Monitors one of these 2 screens
will be present.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 4 – 27
DOWN arrow
ENTER.
DOWN arrow key (if required).
Diagnostic Menu
=====================
View Fre eze Data
Drive Cycle Monitor Drive Cycle Monitor
O2 Monitor Tests
Diag Monitor Tests
On-Board Systems
Vehicle Information
Drive Cycle Monitor
=====================
Since DTCs Cleared
This Drive Cycle This Drive Cycle
4