Boot Procedures; Boot Console Handler (Bch) Boot Procedures; Boot To The Hp-Ux Prompt - HP Disk Carrier Blade for bh3710 Installation Manual

hp Carrier Grade Server bh3710 Server Blade Installation Information
bp2200 Server Blade

Boot Procedures

The following sections describe the procedure for booting the Boot Console Handler, booting to the HP-UX
prompt, and rebooting to HP-UX to restart the system.

Boot Console Handler (BCH) Boot Procedures

The blade will boot to BCH upon insertion in the chassis. When the boot process is completed (in
approximately one to five minutes) the BCH main menu will be displayed as shown below:
----Main Menu ----------------------------------------------------
Command
------------
BOot [PRI|ALT|<path>]
PAth [PRI|ALT] [<path>]
SEArch [DIsplay|IPL] [<path>]
COnfiguration menu
INformation menu
SERvice menu
DIsplay
HElp [<menu>|<command>]
RESET
----
Main Menu: Enter command or menu

Boot to the HP-UX Prompt

Start the boot process by using the factory default boot path. Type, BO PRI, at the BCH main menu prompt
and press .
ENTER
NOTE Booting the system to an HP-UX login prompt from the BCH main menu will take five minutes
or longer depending on your software and hardware configuration.
Once the system reaches the HP-UX login prompt, the following information will be displayed on the console
screen:
Generic SysName [HP Release B.11.11] (see /etc/issue)
Console Login:
5-12
Description
--------------
Boot from specified path
Display or modify a path
Search for boot devices
Displays or sets boot values
Displays hardware information
Displays service commands
Redisplay the current menu
Display help for menu or command
Restart the system
Chapter 5