Advanced Mode: Video Input - Bosch VJT-X20S Installation And Operating Manual

46 en | Configuration Using a Web Browser
Save system log
Check this option to save system messages in a text file on your local computer.
You can then view, edit and print this file with any text editor or the standard Office software.
File for system log
1.
2.
5.17

Advanced Mode: Video Input

You can activate the 75 Ohm terminating resistance for each video input of the VideoJet X20.
The terminating resistance must be deactivated for the video signal to be looped through.
Every video input is closed at the time of delivery.
NOTICE!
i
The numbering follows the labeling of the video inputs on the actual unit.
75 Ohm termination
Select Off if the video signal is to be looped through.
Source type
To allow VCRs to be connected as a video source, you can change the characteristic of the
video source from the preset value of Camera to VCR. VCRs require a more tolerant setting
for the internal PLL as a result of jitter effects caused by the mechanical components of a
VCR.
NOTICE!
i
In some cases, selecting the VCR option can lead to an improvement in the video image even
with a camera connected.
DOC | V4.0 | 2009.06
Enter the path for saving the system log here.
If necessary, click Browse to find a suitable directory.
Installation and Operating Manual
VideoJet X20
Bosch Security Systems