Basic Mode: Encoder Profile - Bosch VJT-X20S Installation And Operating Manual

34 en | Configuration Using a Web Browser
Gateway address
If you want the unit to establish a connection to a remote location in a different subnet, enter
the IP address of the gateway here. Otherwise leave the box blank (0.0.0.0).
5.6

Basic Mode: Encoder Profile

Active profile
You can select a profile for encoding the video signal for each encoder (video input).
You can use this to adapt the video data transmission to the operating environment (for
example network structure, bandwidth, data load).
Pre-programmed profiles are available, each giving priority to different perspectives. When
selecting a profile, details are displayed in the list field.
–
–
–
–
–
–
–
–
DOC | V4.0 | 2009.06
Low bandwidth (CIF)
High quality for low bandwidth connections, resolution 352 × 288/240 pixels
Low delay (2/3 D1)
High quality with low delay, resolution 464 × 576/480 pixels
High resolution (4CIF/D1)
High resolution for high bandwidth connections, resolution 704 × 576/480 pixels
DSL
For DSL connections with 500 kbps, resolution 352 × 288/240 pixels
ISDN (2B)
For ISDN connections via two B-channels, resolution 352 × 288/240 pixels
ISDN (1B)
For ISDN connections via one B-channel, resolution 352 × 288/240 pixels
Modem
For analog modem connections with 20 kbps, resolution 352 × 288/240 pixels
GSM
For GSM connections at 9,600 baud, resolution 176 × 144/120 pixels
Installation and Operating Manual
VideoJet X20
Bosch Security Systems