Advanced Mode: Display Stamping - Bosch VJT-X20S Installation And Operating Manual

Network video server
Table of Contents

Advertisement

VideoJet X20
8.
9.
Time server IP address
The VideoJet X20 can receive the time signal from a time server using various time server
protocols, and then use it to set the internal clock. The unit polls the time signal automatically
once every minute.
Enter the IP address of a time server here.
Time server type
Select the protocol that is supported by the selected time server. Preferably, you should
select the SNTP server as the protocol. This supports a high level of accuracy and is required
for special applications and subsequent function extensions.
Select Time server for a time server that works with the protocol RFC 868.
5.13

Advanced Mode: Display Stamping

Various overlays or "stamps" in the video image provide important supplementary information.
These overlays can be enabled individually and are arranged on the image in a clear manner.
NOTICE!
i
The settings on this page apply to both camera inputs.
Camera name stamping
This field sets the position of the camera name overlay. It can be displayed at the Top, at the
Bottom or at a position of your choice that you can then specify using the Custom option. Or
it can be set to Off for no overlay information.
1.
2.
3.
Bosch Security Systems
If there are empty lines at the bottom of the table, for example after deletions, you can
add new data by marking the row and selecting required values from the list fields.
Now click the OK button to save and activate the table.
Select the desired option from the list.
If you select the Custom option, additional fields are displayed where you can specify the
exact position (Position (XY)).
In the Position (XY) fields, enter the values for the desired position.
Installation and Operating Manual
Configuration Using a Web Browser | en
DOC | V4.0 | 2009.06
41

Advertisement

Table of Contents
loading

This manual is also suitable for:

Videojet x20

Table of Contents